Production/ Каталог продукции

Glued plywood of mark FK (MR glue- "Moisture Resistant")

of higher grades is used in furniture and parquet production, plywood of lower grades is used as package material and partially in construction.
Quality system of plywood production meets requirements of STB ISO 9001. Raw materials used in plywood production meets requirements of FSC. 
Main characteristics of plywood (GOST 3916.1-96)
 Dimension of sheets- 1525x1525 mm
Grade- E, I/II, II/II, II/III, II/IV, III/III. III/IV, IV/IV
Thickness of sheets- 3, 4, 5, 6, 8, 9, 10, 12, 15, 18, 21, 24, 30 mm
Kind of treatment- Both sides are sanded except grade IV/IV
Level of water-resistance- FK (water-resistant plywood)
Raw material- Round broad-leaved timber
Materials- Carbamide-formaldehyde resin KF-O acc. to GOST 14231-88, Ammonium chloride acc. to GOST 2210-73
Plywood humidity- No more than 10% (5-8 % by fact)
Limit of strength when splitting off glued layer after soaking in water during 24 hours is as follows:
Birch plywood- No less than 1.5 Mpa (1.5-1.8 Mpa by fact)
Alder plywood- No less than 1.2 Mpa (1.2-1.5 Mpa by fact)

Plywood  WBP- "Water Boiled Proof" GOST 3916.1-96 1250*2500 (birch) high water resistance,

it contains 8 mg formaldehyde for 100 g dry plywood, phenolformaldehyde resin. Class of emission (hygiene) E1, humidity- 5-10 %

Our birch plywood is a high-quality structural material. The availability of birch veneer sheets in all layers of plywood and use of high-quality glue and state-of-the art equipment allows us to manufacture the world class product, that meets the world quality standards.

Film faced plywood GOST 3916.1-96:

Our film faced plywood is exterior birch plywood, overlaid with phenol or melamine film on one or both sides. Film faced surface of the panel prevents it from moisture penetrating, has high resistance to abrasion, chemicals and fungus formation. Edges of film-faced plywood are varnished with water-resistant acryl-based paint. Wide range of film colours and types of surface (smooth, wiremesh, paper coated) allows to widen a range of end use areas of film faced plywood.
Grading- I and II
Surface quality- Smooth (F/F), smooth/wire mesh (F/W)
it contains 8 mg formaldehyde for 100 g dry plywood, phenolformaldehyde resin(СФЖ-3014 (GOST 20907-75)).
Moisture content- 5-10%
The foil- 120-150 gr/m2
Edge sealing- Waterproof acrylic paint
Formaldehyde emission class- Е1
The breaking point from chipping by glued layers after boiled in the water:
during 1 h- not less than 1.5 MPa(for birch)-in megapascal
after 6 h- not less than 1,2 MPa (for birch)
F/F:
Film Faced Birch Plywood is high-quality plywood with special film. The laminated
surface stops moisture from penetrating and provides resistance to abrasion,
aggressive environments, fungus and mold. Edges are sealed with water-resistant
acrylic paint.
Smooth from 2th sides
F/W:
wire mesh surface- type of plywood offers slip protection.

 

  -  Консервация молочная
  -  Овощная консервация
  -  Морковные и березовые соки

 

- Juices (birch, carrot, tropical, etc.)

 

Мы продаем:

  -  спички с разным цветом головки (зеленым, красным, коричневым);
  -  спички с различными этикетками (печатная этикетка или нанесение печати сразу на коробок, по согласованию с заказчиком на этикетке может быть размещена реклама);
  -  различная упаковка спичек (в бумагу, в полипропилен, упаковка в ящики, упаковка в термоусадочную пленку с различным количеством коробков).

  -  ДСП, ЛДСП
  -  ДВП, ДВПО

  -  МДФ (сырое, ламинированное)

  -  ХДФ (сырое, ламинированное)
  -  Фанера (ФК, ФСФ, ФОФ)

 

- Particleboard (raw, laminated)

- Fibreboard (raw, painted)

- Medium density fibreboard (MDF) (raw, laminated)

- High density fibreboard (HDF) (raw, laminated)

- Plywood (MR, WBP, laminated)

Glued plywood of mark FK (MR glue- "Moisture Resistant")

of higher grades is used in furniture and parquet production, plywood of lower grades is used as package material and partially in construction.
Quality system of plywood production meets requirements of STB ISO 9001. Raw materials used in plywood production meets requirements of FSC.
Main characteristics of plywood (GOST 3916.1-96)
Dimension of sheets- 1525x1525 mm
Grade- E, I/II, II/II, II/III, II/IV, III/III. III/IV, IV/IV
Thickness of sheets- 3, 4, 5, 6, 8, 9, 10, 12, 15, 18, 21, 24, 30 mm
Kind of treatment- Both sides are sanded except grade IV/IV
Level of water-resistance- FK (water-resistant plywood)
Raw material- Round broad-leaved timber
Materials- Carbamide-formaldehyde resin KF-O acc. to GOST 14231-88, Ammonium chloride acc. to GOST 2210-73
Plywood humidity- No more than 10% (5-8 % by fact)
Limit of strength when splitting off glued layer after soaking in water during 24 hours is as follows:
Birch plywood- No less than 1.5 Mpa (1.5-1.8 Mpa by fact)
Alder plywood- No less than 1.2 Mpa (1.2-1.5 Mpa by fact)

Plywood WBP- "Water Boiled Proof" GOST 3916.1-96 1250*2500 (birch) high water resistance,

it contains 8 mg formaldehyde for 100 g dry plywood, phenolformaldehyde resin. Class of emission (hygiene) E1, humidity- 5-10 %

Our birch plywood is a high-quality structural material. The availability of birch veneer sheets in all layers of plywood and use of high-quality glue and state-of-the art equipment allows us to manufacture the world class product, that meets the world quality standards.

Film faced plywood GOST 3916.1-96:

Our film faced plywood is exterior birch plywood, overlaid with phenol or melamine film on one or both sides. Film faced surface of the panel prevents it from moisture penetrating, has high resistance to abrasion, chemicals and fungus formation. Edges of film-faced plywood are varnished with water-resistant acryl-based paint. Wide range of film colours and types of surface (smooth, wiremesh, paper coated) allows to widen a range of end use areas of film faced plywood.
Grading- I and II
Surface quality- Smooth (F/F), smooth/wire mesh (F/W)
it contains 8 mg formaldehyde for 100 g dry plywood, phenolformaldehyde resin(СФЖ-3014 (GOST 20907-75)).
Moisture content- 5-10%
The foil- 120-150 gr/m2
Edge sealing- Waterproof acrylic paint
Formaldehyde emission class- Е1
The breaking point from chipping by glued layers after boiled in the water:
during 1 h- not less than 1.5 MPa(for birch)-in megapascal
after 6 h- not less than 1,2 MPa (for birch)
F/F:
Film Faced Birch Plywood is high-quality plywood with special film. The laminated
surface stops moisture from penetrating and provides resistance to abrasion,
aggressive environments, fungus and mold. Edges are sealed with water-resistant
acrylic paint.
Smooth from 2th sides
F/W:
wire mesh surface- type of plywood offers slip protection.